The 28" videowall monitors of the new SMV 300 series are versatile, robust and reliable video displays. They are characterised by a rugged metal case, which is easily stackable. The new generation Permachrome Shadow Mask CRT guarantees excellent performance in terms of purity and contrast, also improving convergence and brightness. It allows the monitor to be used world-wide without the typical purity problems due to the earth's magnetic field.
    Designed for the videowall application, due to the stylish cabinet, the SMV 300 monitors can also be used as a stand-alone video displays.They are easy to move being provided with carrying handles and easy to maintain as well.
    The SIM2 videowall monitors features CRTs tinted phosphor to assure bright and sharp pictures with excellent colour balance, CTI to increase colour resolution, and a COMB filter to reduce cross colour and cross luminance.
    The videowall monitors of the SMV 300 series can be connected to PAL or NTSC video sources with automatic selection and size control. The videowall monitor is available in 2 models: the SMV 300 NBP and SMV 300 RGB W.
    SMV 300 NBP
The SMV 300 NBP features a wide range of inputs (composite video 1 via BNC, video 2 via SCART, analogue or TTL RGB signal via DB9-sub or SCART), with video loop-through. The monitor features the video priority capability: if more signals are connected at the same time to the different input connectors (video 1 - RGB - video 2), the input displayed will be the one with higher priority.
    SMV 300 RGB W
The SMV 300 RGB W is a simplified monitor specifically designed for videowall applications; it accepts only an analogue RGB input signal via DB9 connector. The white colour temperature of both models can be changed from the factory preset nominal value of 6.500°K (typical for use normal environment) to a value of 3.500°K (for use in TV studios.

• FST Black Matrix 28" CRT
• Automatic Priority: video 1 - RGB - video 2 (only NBP)
• Colour System PAL/NTSC
• CTI & Comb filter (only NBP)
• Colour temperature: 6.500°K / 3.299°K (selector)
• SCART/Peritel: RGB + video 2 (only NBP)
• Random Delay on switching-on (adjustable) 5:15 sec.
• External regulations for geometry and picture adjustment
• Mains voltage: 110-120V Ac / 220-240V Ac

• CRT: 28" CRT (71 cm diagonal), World-wide
• Dot pitch: 0.8 mm

• Colour system (SMV300 NBP only): PAL & NTSC automatic selection
• CTI & Comb Filter (SMV 300 NBP only): standard
• Signal inputs: Composite Video, RGB +Sync
• RGB bandwidth: 7 MHz ±3dB
• Horizontal scan frequency: 15.625 Hz ±600Hz (PAL); 15750 Hz ±600Hz (NTSC) automatic selection
• Vertical scan frequency: 50-60 Hz autolock, with automatic size control
• Cut off: automatic
• Colour temperature: 6500°K (normal) and 3200°K (internal selection switch)
• Colour temp. adjust.: 6500°K internal adjustment for both black level and white level

• Analog RGB input: (SMV 300 RGB): via Canon DB9 connector.
• Analog RGB input (SMV 300N - 300 DELTA): via Canon DB9-sub and SCART socket.
• TTL RGB input (SMV 300N - 300 DELTA only): via Canon D9-sub
• Video input 1 (SMV 300N - 300 DELTA only): via BNC connector
• Video input 2 (SMV 300N - 300 DELTA only): via SCART socket
• Video output (SMV 300N - 300 DELTA only): via BNC connector (passive loop-through) just for Video input 1

• External controls (SMV 300 RGB): brightness; contrast; colour saturation and Hue; H and V amplitude, H and V shift.
• External controls(SMV 300N - 300 DELTA):brightness; contrast; H and V amplitude, H and V shift; Keystone, Pincushion and vertical linearity.
• Main switch
• External switch (SMV 300N - 300 DELTA): 75? on/off (only for Video 1)

• Warm up time: 30 minutes
• Degaussing: Automatic when switched on
• Switch on delay: random within 2 to 8 sec
• Input Voltage: 120-240 V; 50/60 Hz with loop through power supply. Voltage rating manually adjustable though a voltage selector on the rear panel. Factory default setting: 220 Vac.
• Ambient temperature: from 0° to 40°C
• Relative humidity: from 0° to 90% not condensed
• Power consumption(max):2A @ 120V; 1A @ 220-240V
• Power supply loop through: 4 units @ 120V; 8 units @ 220/240V

• Dimensions (WxHxD): 594 x 469 x 505 mm
• Package size (WxHxD): 700 x 600 x 620 mm
• Net Weight: 40 Kg
• Gross Weight: 48 Kg (max)
• Maximum number of monitors can be stacked: 10 units